Calculator · Updated Nov 20, 2026
How many foundation piers do I need? Pier count and cost calculator
A quote says "14 piers" and the number feels pulled from thin air. It isn't: piers go along the part of the foundation that's moving, at a set spacing. HomeGuide gives typical spacing of every 5 to 8 feet (HomeGuide), and Angi says most underpinning jobs need around 10 piers (Angi). Enter the length of wall that's moving to sanity-check a count and a budget.
Count = length ÷ spacing, plus one pier at the end, at 8-foot and 5-foot spacing (HomeGuide's typical range). Cost = count × Angi's 2026 average per pier type. National figures, not a quote; the real count comes from an on-site inspection and, in San Antonio, a Texas-licensed engineer.
How to measure "length that needs support"
- Walk the outside of the house and note where cracks, gaps and sloping floors cluster (20-point checklist).
- Measure the run of exterior wall along that area with a tape or by pacing it off. A settling corner might be one short run on each side; a sinking side of the house is the whole wall.
- Interior piers are sometimes added under interior beams; this calculator only covers a straight run, so treat it as a minimum.
Cost per pier, by type (2026)
| Pier type | Average each | Source |
|---|---|---|
| Segmented concrete | ~$1,000 | Angi |
| Steel push | ~$2,000 | Angi |
| Helical | ~$3,000 (HomeGuide range $2,000–$4,000) | Angi; HomeGuide |
Sources: Angi, How Much Does Pier and Beam Foundation Repair Cost? (updated Sep 18, 2026); HomeGuide, How Much Do Helical Piers Cost? (Feb 6, 2026); Angi, How Much Does Underpinning a Foundation Cost? (updated Oct 30, 2026).
Whole-job context from Angi: most homeowners spend $10,000–$30,000 when around 10 piers are needed, and 15 or more piers can reach $15,000–$45,000 (Angi). HomeGuide adds that helical piers are usually priced flat to a standard depth, with $20–$25 or more per extra foot beyond it (HomeGuide), so ask about a "no depth clause." Compare types in helical vs push piers and steel vs concrete piers.
Three things that change the count
- How much is actually moving. An elevation survey shows where the slab dips, so piers go where they're needed.
- House weight and soil. HomeGuide says count depends on the structure's size and weight and the manufacturer's load calculations (HomeGuide).
- Pier and beam vs slab. Raised houses are often reshimmed or get new piers under beams instead; see pier and beam repair and the house leveling cost calculator.
Next: foundation repair cost per pier · how to read an estimate · compare quotes · foundation repair cost calculator
Frequently asked questions
How many piers does a house need for foundation repair?
It depends on how much of the house is moving. HomeGuide says a typical residential foundation often needs 5 to 10 helical piers, and Angi says most underpinning jobs need around 10 piers. Only the part of the foundation that's moving usually gets piers.
How far apart are foundation piers?
HomeGuide gives typical helical pier spacing of every 5 to 8 feet, depending on the project. The final spacing comes from the contractor's or engineer's load calculations.
How much does each pier cost?
Angi's 2026 averages are about $1,000 for segmented concrete, $2,000 for steel and $3,000 for helical piers, with a single pier typically $1,000–$3,000. HomeGuide puts helical piers at $2,000–$4,000 each.
How much does a 10-pier job cost?
Angi says most homeowners spend $10,000–$30,000 when around 10 piers are needed, and jobs with 15 or more piers can reach $15,000–$45,000.
Why do two quotes have different pier counts?
They may be supporting different lengths of wall or using different spacing and pier types. Ask each company to mark the pier locations on a drawing so you compare the same scope.
Your offer: a real pier count, free
Want a count based on your house, not a formula? LevelSATX Foundation Network matches you with one vetted, independent network partner for a free foundation inspection and a written quote that marks where each pier goes. We are a referral service and don't do repairs; partners pay us for referrals, and any company can apply to join the network.
LevelSATX Foundation Network connects San Antonio homeowners and commercial property owners with vetted, independent foundation repair contractors. We don't perform repairs; participating contractors pay us for referrals. Any company can apply to join the network.