Referral service: we connect you with independent, vetted local foundation contractors who do the work. How it works & how we're paid

Comparison · Updated Nov 13, 2026

Drilled and bell-bottom concrete piers vs pressed pilings and steel piers

A drill rig boring holes for concrete pier foundations inside a building under construction
A drill rig boring holes for pier foundations inside the Rubin Observatory building during construction. Illustrative only; not a house or a partner's work. Photo: Rubin Observatory/NSF/AURA, CC BY 4.0.

Two bids, two kinds of concrete pier. One says "pressed pilings." The other says "drilled bell-bottom piers." The Foundation Performance Association's paper on post-repair performance on expansive soils describes them as different systems that carry load in different ways (FPA-RC-01-0). Here's how they compare, with the cost numbers that are actually published.

The story: comparing apples to bells

Picture this (a typical scenario, not a real customer). A homeowner has two quotes within a few thousand dollars of each other. One has more piers; the other has fewer, deeper ones with a bell at the base. Neither homeowner nor quote explains why. The right question isn't "which is cheaper," it's "what is each pier resting on?"

Drilled vs pressed vs steel piers

Drilled / bell-bottom concretePressed concrete pilingsSteel push / helical
How it's installedHole drilled, rebar set, concrete poured in placePrecast concrete cylinders pressed in with the house's weightSteel pipe driven, or screwed in with helix plates
Main support (FPA)Bearing at the bottom, plus some skin frictionSkin friction along the sidesVaries by product (see pier guides)
Bell optionYes (under-reamed bell-bottom)NoNo
Average cost (Angi, per pier)Not separately listed~$1,000 (segmented)~$2,000 steel; ~$3,000 helical

Sources: Foundation Performance Association, FPA-RC-01-0: Post Foundation Repair Performance of Residential and Other Low-Rise Buildings on Expansive Soils (PDF); Angi, How Much Does Pier and Beam Foundation Repair Cost? (updated Sep 18, 2026). National averages, not San Antonio quotes.

How the FPA describes drilled piers

Drilled piers are cast in place. The system can be a straight shaft or a straight shaft with an under-ream at the base, commonly called a bell. A hole is excavated, steel reinforcement goes in, and concrete is placed and vibrated. The concept is to get support below the active zone of the soil to minimize future movement (FPA).

What can go wrong (FPA list)

  • Pier not deep enough, or soil that doesn't suit drilled piers
  • Improper bell, too much load, or a pier cap that's too thin
  • Improper reinforcing steel or poorly vibrated concrete
  • Loose soil falling into the bottom of the hole before the pour
  • Poor drainage or seasonal moisture changes on shallow piers

Pressed pilings have their own list, including piles not driven below the moisture-active zone and drought releasing skin friction at shallow depths (FPA). This is why depth and soil data matter more than the brand name of a pier.

What it costs

Angi's 2026 data lists piering at $1,000–$3,000 per pier (Angi) and underpinning in its own guide (Angi); HomeGuide puts a full underpinning or piering job at $10,000–$20,000 (HomeGuide, Feb 6, 2026). Neither breaks out drilled piers separately, so ask each bidder for price per pier, pier count, target depth and bell diameter in writing. See how to read an estimate.

Why it matters in San Antonio

Bexar County's Blackland Prairie clay shrinks and swells with moisture (Texas Master Naturalist), and Texas regulators note that movement can cause both heave and settlement (TDLR). Compare all pier types in pier foundation repair, steel vs concrete piers, helical vs push piers and underpinning.

Your offer: a pier plan you can compare

LevelSATX Foundation Network matches you with one vetted, independent network partner for a free foundation inspection and a written quote that states the pier type, count and layout. We are a referral service and do not perform repairs; partners pay us for referrals, and any company can apply to join the network. For an independent design, you can also hire a licensed engineer; see specialist vs engineer.

Get my free inspection match

Want a real number for your home?

Calculators and guides give ranges. A free inspection from one vetted, independent local contractor gives you a written quote. No cost, no obligation.

Get my free inspection →

Or call (210) 796-7891.

Frequently asked questions

What is a drilled pier?

The Foundation Performance Association describes drilled piers as a cast-in-place support: a hole is excavated, steel reinforcement is placed, and ready-mix concrete is poured and vibrated. Most support comes from the bottom of the pier, with some skin friction along the shaft.

What is a bell-bottom pier?

A drilled pier with an under-ream at the base, commonly called a bell. The FPA lists it as a variation of a drilled straight shaft.

How are drilled piers different from pressed pilings?

Pressed piles are precast concrete sections stacked and pressed into the ground using the house's weight until the pile stops and the structure begins to rise. The FPA says their main support is skin friction along the sides, while drilled piers rely mainly on bearing at the bottom.

How much do drilled piers cost?

Angi and HomeGuide don't publish a separate national drilled-pier price. Angi's 2026 pier-and-beam guide lists averages of about $1,000 for segmented concrete piers, $2,000 for steel and $3,000 for helical, and HomeGuide puts a full underpinning or piering job at $10,000–$20,000. Ask for a written per-pier price and pier count.

What can go wrong with drilled piers?

The FPA lists issues such as improper depth, soil conditions that don't suit drilling, an improper bell, poor drainage, improper reinforcing steel and loose soil collapsing into the bottom of the hole.

Keep reading

Sources cited on this page: Angi, How Much Does Foundation Repair Cost? (updated Oct 26, 2026); Angi, How Much Does Pier and Beam Foundation Repair Cost? (updated Sep 18, 2026); Angi, How Much Does Underpinning a Foundation Cost? (updated Oct 30, 2026); Foundation Performance Association, FPA-RC-01-0: Post Foundation Repair Performance of Residential and Other Low-Rise Buildings on Expansive Soils (PDF); HomeGuide, How Much Does Foundation Repair Cost? (Feb 6, 2026); Texas Master Naturalist, Alamo Area Chapter: Bexar County Soils; Texas Dept. of Licensing & Regulation, Technical Bulletin IHB TB 10-01 (Foundations on Expansive Soils). Cost figures are national, not San Antonio quotes.

LevelSATX Foundation Network connects San Antonio homeowners and commercial property owners with vetted, independent foundation repair contractors. We don't perform repairs; participating contractors pay us for referrals. Any company can apply to join the network.

Get your free foundation inspection

4 quick taps. Free, no obligation.

Question 1 of 4

What are you noticing?
What's the property's ZIP code?

What kind of property is it?

When would you like someone to look?
Where should your match reach you?

Referral service: LevelSATX Foundation Network connects San Antonio homeowners and commercial property owners with vetted, independent foundation repair contractors. We don't perform repairs; participating contractors pay us for referrals. Any company can apply to join the network. We share your request with one matched contractor. Details

Get my free inspection → Call (210) 796-7891